Techniques

Photo Transfer Techniques for Scrapbook Pages

How to transfer a photo onto scrapbook paper using a laser print and gel medium, with steps, supplies, and why inkjet prints usually won't work.

On this page
  1. Two common approaches
  2. Why laser prints work and inkjet usually does not
  3. Supplies
  4. Steps: laser print and gel medium
  5. Tips for a clean transfer
  6. Common problems
  7. Preserving transferred images

Two common approaches

A photo transfer moves a printed image onto a different surface. For scrapbooking, the most common method uses a laser-printed image and a gel or acrylic medium. A second approach uses specialty transfer sheets made for your printer type. Other transfer products and solvent-based methods also exist. If you use one, read its instructions closely and work in a ventilated space.

Why laser prints work and inkjet usually does not

Laser printers fuse toner, a powder, onto the paper with heat. With the right medium and pressure, that toner can lift off the printed paper and bond to a new surface. Many inkjet prints use water-based ink that smears or softens when wet, so they usually do not transfer cleanly with this method. Check your printer type before you print, and test a small sample first.

Supplies

  • Laser printer: or a laser print from a copy shop.
  • Gel or acrylic medium: a thick, clear medium that bonds the image to the paper.
  • Brayer or small roller: to press the image down and remove air bubbles.
  • Scraper or old plastic card: to smooth the image and press out bubbles.
  • Damp sponge or spray bottle: to soften the paper backing.
  • Smooth paper or cardstock: for the surface you are transferring onto. Textured paper can show gaps in the image.
  • A copy or scan of the photo: not the original.

Steps: laser print and gel medium

  1. Print in reverse. Print the image as a mirror image on a laser printer so the transferred image reads correctly. Many printer settings include a mirror option, or you can flip the image in editing software. Trim the print close to the image.
  2. Apply the medium. Spread a thick, even layer of gel medium over the printed side of the image. Cover the whole image.
  3. Place the image. Lay the image face down onto your cardstock. Use a brayer or scraper to smooth it out and press out any bubbles.
  4. Dry completely. Let the piece dry without moving it. Many instructions suggest leaving it overnight.
  5. Soften the paper backing. Dampen the back of the printed paper with a sponge or spray bottle.
  6. Rub away the paper. Gently rub the paper with your fingers. It should begin to roll and break apart in layers. Keep rubbing until only the image remains.
  7. Dry and seal (optional). Let the transfer dry, then add a thin coat of medium over the top to protect it.

Tips for a clean transfer

  • Test on scrap first. Try the full process on a spare piece of cardstock before using a photo you care about.
  • Work from a copy. A mistake or tear cannot be undone, so use a print or scan rather than the original photo.
  • Be patient when rubbing. Too much pressure can tear the image, while too little leaves paper behind. Work in small areas.
  • Choose images with clear lines. Simple, well-lit images often show detail more clearly after transfer.
  • Press out bubbles early. Bubbles set into the medium if you wait too long.

Common problems

  • Cloudy or missing parts: the paper was not fully removed, or the medium was uneven. Keep rubbing gently, or add more medium and let it dry again.
  • The image is backwards: the print was not mirrored. Print again in reverse.
  • Air bubbles: press them out with a brayer before the medium dries.
  • The paper tears unevenly: the paper was too wet or the rubbing was too forceful. Dampen lightly and work in short strokes.

Preserving transferred images

Gel mediums vary in permanence, so check the product’s ratings and any guidance about archival use. Keep transferred pages out of direct sunlight and high humidity, and keep a digital copy of the finished page. Only transfer photos you have the right to copy. Family photos you own are a common example.

For a painted background behind a transfer, watercolor backgrounds for scrapbook pages explains how to keep the paint light and even. Before you start, how do you digitize a scrapbook? covers scanning options for making the copy you transfer from.

The complete guide to techniques

Scrapbooking Techniques Every Crafter Should Know
Read the guide

Keep exploring

Guides from other topics

All topics →