To stick glitter to paper, brush a thin layer of adhesive onto the paper, sprinkle glitter over it, press it down, let it dry fully, and shake off the extra. The adhesive can be liquid glue, a glue-based medium such as Mod Podge, or a double-sided adhesive sheet. Each suits different projects.
Method 1: Liquid glue
- Protect your work surface. Lay down scrap paper or freezer paper, shiny side up, to catch falling glitter.
- Apply a thin layer. Brush PVA or school glue onto the paper in an even layer. Too much glue pools and bunches, which makes the glitter clump.
- Add the glitter. Sprinkle glitter generously over the wet glue.
- Press and set. Press the glitter down gently. Lay a sheet of non-stick release paper over it and burnish lightly to help the particles settle.
- Dry. Let it dry completely. Heavy layers may need overnight drying.
- Shake off the excess. Tilt the paper so the loose glitter runs back into its container.
- Seal (optional). Add a very light coat of watered-down glue, Mod Podge or a clear spray sealer to reduce shedding.
Method 2: Double-sided adhesive sheets
Double-sided adhesive sheets are the cleanest option for crisp shapes. They are tacky straight away, so there is no wait for glue to dry.
- Peel the first liner from the adhesive sheet and press the sticky side onto your cardstock.
- Peel the second liner off the top.
- Sprinkle glitter over the sticky surface.
- Press firmly with your fingers or a non-stick sheet so the glitter binds.
- Tap off the excess and return it to the jar.
You can also cut the adhesive into shapes with a die or craft knife, then add glitter to make glitter stickers, one of several Cricut sticker ideas. Each sticker can then be placed on a page.
Method 3: Mod Podge or gel medium
Brush a layer of glue-based medium, such as Mod Podge or a gloss gel medium, onto the paper. Sprinkle fine glitter over the wet medium. Let it dry, then add a thin topcoat of medium to lock the glitter in place. Fine glitter tends to work best with this method, because chunkier pieces can be harder to hold.
Method 4: Glitter paste
Glitter paste is a thick, spreadable mix. You can buy it ready-made, or mix glitter into a clear, thick glue-based medium. Spread it with a palette knife or brush for textured lines or raised accents. Paste takes longer to dry than a thin layer, so plan for extra drying time before you handle the page.
Fixing common problems
- Glitter flakes off: the adhesive may be too thin or not fully dry. Add a second thin coat and let it dry longer.
- The paper warps: too much liquid glue can make paper wavy as it dries. Use less glue, and press the sheet under a heavy book after it dries.
- Edges smudge: liquid glue can spread past the shape you want. Use a stencil or masking tape for clean edges, or switch to double-sided adhesive.
- Glitter goes everywhere: work over scrap paper or a tray, and keep the glitter container closed between uses.
Tips for scrapbook pages
Test on a scrap of the same paper before working on a finished layout. Keep glitter to a few focal points, such as a title or a border, rather than covering the whole page. Let each layer dry before adding the next. Store glitter in a sealed container, since loose glitter can drift onto other pages.
If you plan to cut glitter cardstock with a machine, see Cricut settings for glitter cardstock before you start. For more on placing glitter within a layout, how to decorate a scrapbook covers the layering order and where accents work best.