Paper Crafts

What can I use as a backing for a picture frame?

Choose a picture frame backing: foam board, acid-free backing board, or kraft paper dust cover. Learn which materials suit posters, photos, and original art.

On this page
  1. Rigid backing boards
  2. Dust covers for the back
  3. Using scrapbook paper as a backing
  4. What to avoid
  5. Cutting and securing the backing
  6. Common questions

For most framed prints and paper art, use a rigid backing board to hold the piece flat, then cover the back of the frame with a paper dust cover. Foam board works for posters and casual prints. For original art, photos, or anything you want to keep, choose an acid-free board. Regular cardboard is fine only for casual items that won’t last long.

Rigid backing boards

  • Foam board. Lightweight, rigid, and easy to cut. Standard foam board suits posters and casual prints. For original art or valuable photos, choose an acid-free (archival) foam board, which helps prevent yellowing over time.
  • Matboard or mounting board. Thicker and flatter than basic cardboard. Standard and archival grades are both available. Archival is the safer choice for keepsakes.
  • Cardboard or pressboard. Works for temporary or casual use. Regular cardboard can contain acids that may stain or damage artwork over time, so place an acid-free barrier between it and anything you want to keep.

Dust covers for the back

A dust cover is the paper that seals the back of the frame. It keeps out dust and debris and gives the frame a finished look.

  • Acid-free backing paper. A paper made for framing. Look for an acid-free label before you buy.
  • Kraft paper. A traditional, lightweight brown paper. It’s inexpensive and common. Check the label if the piece matters to you, because kraft isn’t always acid-free.

Attach the dust cover along the edges with framer’s tape or double-sided tape, leaving the center free.

Using scrapbook paper as a backing

Scrapbook paper can work as a decorative backing behind a clear frame. Mount it on foam board so it stays flat, then place it in the frame.

  • Use thicker sheets. Thin paper wrinkles as glue soaks in.
  • Read the adhesive label. Work in a ventilated space, and check whether the adhesive is repositionable before you commit.
  • Keep valuable items separate. If the item in the frame matters to you, don’t glue paper onto it. Use a separate board behind it.

What to avoid

  • Placing regular cardboard directly against an original photo or piece of art.
  • Gluing a backing to the back of a photo or print you want to keep. Photo corners are a safer hold, as explained in the best glue to stick photos.
  • Forcing a backing that doesn’t fit the frame. Measure first, then cut the board a little smaller than the opening.

Cutting and securing the backing

  1. Measure the inside opening of the frame.
  2. Cut the backing board a little smaller than the opening so it fits without forcing.
  3. Place the art or paper face down on a clean surface, then add the board on top.
  4. Hold the board in place with the frame’s backing points or tabs, or with a few small pieces of framer’s tape at the edges.
  5. Add the dust cover last.

Common questions

What is the best backing for a picture frame?

For most items, an acid-free rigid board plus a paper dust cover works well. Standard foam board is fine for posters and casual prints.

Can I use cardboard as a backing?

Yes, for casual items that won’t last long. For original art, photos, or anything you want to keep, use an acid-free board with a barrier between the board and the piece.

For paper-based art that uses a rigid base, see DIY scrapbook paper on canvas. For the full range of ideas, return to the scrapbook paper crafts overview.

The complete guide to paper crafts

Scrapbook Paper Crafts: Framing and Home Decor Ideas
Read the guide

Keep exploring

Guides from other topics

All topics →