Scrapbook paper on canvas makes large wall art for little money. Patterned sheets can cover a 12-inch square panel, and a set of matching panels can form a grid, a color block, or a themed display. The main challenge is wrinkles, so this guide covers how to prevent them as well as the basic steps.
What you need
- A canvas or wood panel. A 12 by 12 inch size matches standard scrapbook paper.
- Scrapbook paper, preferably a heavier sheet
- Decoupage medium, such as Mod Podge, or a spray adhesive
- A foam brush and a brayer, credit card, or flat ruler
- Acrylic paint for the sides of the panel (optional)
- A craft knife for trimming
- A clear sealer for the finished piece
Choose your base
Canvas is light and easy to hang. A wood panel feels more rigid in the hand and is often easier to keep flat under paper. Either works for a first project. Paint the sides of the panel in a color that matches your design if you want the edges to show. Let the paint dry fully before you start on the front.
Step-by-step
- Cut the paper. Cut a sheet slightly larger than the front of the panel so you have room to trim.
- Spread a thin layer. Brush an even layer of medium onto the front of the panel, working from the center outward. A thin layer leaves less liquid to soak into the paper.
- Lay the paper. Set the sheet onto the wet medium and smooth from the center toward the edges.
- Work out bubbles. Use a brayer or credit card with even pressure. Wipe away any glue that squeezes out at the sides.
- Wrap or trim. For a wrapped canvas, fold the extra paper over the edges and glue it down. For a wood panel, trim the overhang with a craft knife or sanding block once the glue has set.
- Seal the piece. After the glue dries, apply two or three thin coats of sealer, letting each coat dry before the next.
Prevent wrinkles
Wrinkles usually appear when glue soaks into thin paper and the paper swells. These changes help:
- Use thicker paper. Heavier sheets hold up better under glue.
- Use less liquid. Thin, even coats keep the paper from soaking through. A very wet layer is the most common cause of wrinkles.
- Try a thicker medium. Some crafters find that a formula made for fabric, which is less watery, gives smoother results on paper. Test on scrap first.
- Consider a spray adhesive. Some spray adhesives are repositionable, so you can lift the paper and adjust it. Read the label for ventilation and drying instructions.
- Seal thin or printed paper first. Spray thin paper with a clear sealer, let it dry, then glue it down. Test this on a scrap sheet before you commit to a large panel.
Design ideas
- One large panel in a bold print
- A grid of matching 12 by 12 panels in one color family
- A panel with a letter or word cut from a second paper
- Mixed patterns in the same palette for a collage effect
- Seasonal swaps: keep the same panel layout and change the paper
Common questions
Can I Mod Podge paper onto canvas?
Yes. Many crafters use Mod Podge on canvas for scrapbook paper. Because the medium is water-based, use thin coats and let each one dry. A thicker formula can help reduce wrinkles. Test on a scrap piece of canvas before you start the finished project.
How can I make my own scrapbook paper?
You don’t need to make your own paper to get a custom look, though you can create scrapbook paper online and print it. Printing your own designs on heavier printer paper or cardstock is a common home alternative. Inkjet prints can smear when they get wet, so seal them before you glue them down. Check your printer’s guidance on the heaviest paper it accepts. Printing digital scrapbook pages at home covers paper and settings.
Caring for the finished piece
Hang the piece indoors, away from direct sun, to help limit fading. Dust it with a soft, dry cloth. Avoid scrubbing or soaking it. Use a hanger rated for the piece’s weight. Canvas is light, so a standard wall hook is usually enough.
For the same paper-and-medium method on another surface, see how to decoupage scrapbook paper onto wood. For more projects, return to the scrapbook paper crafts overview.